WSP 2000
Multi-purpose water vacuum
- Designed for vacuuming liquids at a wide variety of sites and then transporting it to collection points.
- The unit is designed for continuous vacuuming and will pump material over long distances at the same time.
- Balloon-tyre wheels provide good ground clearance and make the unit easy to handle.
- Powerful vacuuming from 1.2 to 4 kW
- A float switch automatically switches off the vacuum motor when the unit reaches full capacity.
|
 |
| Technical data |
| Body |
Glass fibre reinforced plastic |
| Suction connection (mm) |
50 Ø |
| Pump OUT connection |
Geka coupling |
| Suction motor power (kW) |
1.2 - 4 |
| Power supply (Volt) |
230 / 400 |
| Vacuum (mm WS) |
2,300 |
| Air flow rate (lt./min.) |
2,900 - 7,200 |
| Pump motor power (kW) |
0.8 |
| Pump air flow rate (m3/h) |
18 |
| Pump pumping head (m) |
9.0 |
| Drum capacities (litre) |
from 45 to 100 |
| Length x Width x Height (mm) |
820 x 690 x 940 |
| |
|
Practical, easy-to-use water vacuum
Easy to empty. Just open the tap to drain off the fluid. |
Cover for emptying residues and large pieces of dirt. Just release the foot lever and pull the cover back.
|
Cover for residues and large dirt in closed position. |
Inside view showing pump and float switch controlling the suction motor and pump. |
Easy-to-remove pump. Just remove the pump and open the residue cover for total, easy cleaning. |
Easy-to-handle, upstairs and down stairs. |
|
